Decorative Acrylic Resin Flooring North Shields Tyne and Wear

Added: 4th September 2019

  • Acrylic Resin Flooring North Shields Tyne and Wear
  • Commercial Resin Flooring North Shields Tyne and Wear
  • Resin Flake System Flooring North Shields Tyne and Wear
  • Fast Cure Acrylic Resin Flooring North East England
  • Seamless Resin Flooring North Shields Tyne and Wear
  • MMA Resin Flooring North Shields Tyne and Wear
  • Resin Floors North East England
  • Substrate Prior to Installation in Cullercoats

Decorative Acrylic Flake system fast cure resin flooring specialists Resin Flooring North East Ltd have installed 65m2 of mma flooring within a coffee shop at Cullercoats in North Shields North East England after a flood. A laminate flooring system was removed by others and the area dried out using wet vacuums and dehumidifiers.

Once the substrate was dried out a defective floor screed was then removed using mechanical tooling. The substrate was then prepared by dust free diamond grinding to provide a key for the new flooring system. The carefully prepared substrate was then vacuumed to remove all traces of dust and debris.

A surface damp proof membrane was then applied to the carefully prepared substrate which was fully blinded with a coarse silica aggregate. A flowable cementitious fast drying floor screed was then installed upon the DPM membrane at a depth of 10mm by trowel. Once the flooe screed was dry it was prepared by dust free diamond grinding to provide a key for the new acrylic resin flooring system. The carefully prepared substrate was then vacuumed to remove all traces of dust and debris.

A fast curing acrylic resin primer was then applied to the carefully prepared substrate and left to cure. A fast curing flowable acrylic floor screed was then installed upon the primed substrate at a depth of 4mm and fully blinded with a bespoke blend of decorative PVA flakes and left to cure. Once the acrylic floor screed was cured the excess PVA flakes were then removed by vacuum. Two coats of fast curing clear acrylic sealer were then applied over the PVA flakes to seal the surface and complete the operation.

Contact Paul at Resin Flooring North East Ltd on 0191 9033475 or 07720685438 for free expert advice regarding our residential commercial and industrial mma acrylic, epoxy and polyurethane floor screeds and coatings, factory and warehouse floor painting services, industrial resin flooring, epoxy floor coatings and polyurethane flooring systems. Resin Flooring North East Ltd will be pleased to provide you with information about our floor preparation and seamless epoxy flooring systems, discuss your requirements, provide detailed specifications, samples of our flooring systems or a written quotation.

Resin Flooring North East Ltd supply and install our residential, commercial, industrial epoxy, acrylic mma and polyurethane flooring products throughout the North East of England across a wide range of industries and commercial and residential properties in County Durham, Tyne and Wear, Teesside, Cleveland, North Yorkshire, Cumbria, Northumberland, Ashington, Carlisle, Workington, Sunderland, Newcastle, Gateshead, North Shields, North Tyneside, Tynemouth,Wallsend, Whitley Bay, Cramlington, Longbenton, Washington, Tyne and Wear, Seaham, Peterlee, Chester le Street, Durham, Horden, Easington, Stanley, Newton Aycliffe, Darlington, Middleton St George, Ferryhill, Shildon, Prudhoe, Haltwhistle, Corbridge, Carlisle, Consett, Stockton on Tees, Hartlepool, Billingham, Middlesbrough, Thirsk, Ripon, Northallerton, Masham, Harrogate, Yarm, South Shields, East Boldon, South Tyneside, York, Wetherby, North Yorkshire and West Yorkshire.